Personalinformation:
DENGShengxiang
Professor（Level3），DoctoralSupervisor
Energyand power engineering
Acadamiclevel:Doctor ofEngineering
Office:Eighth Building
Telephone:15874137307
E-mail:csdsx@163.com
ResearchDirection:
1New energy and energy-saving technologies
2Visual simulation and intelligent control
3Thermal process detection and parameter soft sensing
4Energy planning
5Energy saving assessment and energy audit
LectureCourse:
Undergraduate:
1Energy system control technology，32credit hour，Professionalcourses，Requiredcourse
2Fundamentals of wind power generation technology，32credit hour，Professionalcourses，Optionalcourse
3Fundamentals of thermal engineering，48credit hour，Professioncourse，Optionalcourse
GraduateStudent:
1Wind power theory and practice，32credit hour，Professioncourse，Optionalcourse
2Artificial environment measurement and control technology，32credit hour，Professioncourse，Optionalcourse
Academiccareer:
1989-1993,Central South University of Technology, Bachelor's degree of ThermalEngineering
1996-1999,Central South University of Technology, Master's degree of ThermalEngineering
1999-2004,Central South University, Doctor’s degree of Thermal PowerEngineering
PersonalProfile:
2010-2011 A visiting scholar in Purdue University to carry outcooperative research
2011Promotion to Professor
2013Promoted to doctoral supervisor
2021Promoted to the third level professor
Anexpert in the evaluation of doctoral dissertations at the AcademicDegree and Graduate Education Development Center of the Ministry ofEducation
Frontiers in Energy Research’sGuest editor（IF:3.858)
IEEEmember
InstrumentTechnical Committee of National Petroleum and Chemical Industrymember
Energysaving expert of Hunan Development and Reform Commission
Electrolyticaluminum energy saving technology expert
ChiefScientist of System Energy conservation and General consultant ofMOAR Project
Naturalscience consulting and evaluation experts of Hunan Province, ZhejiangProvince, Hebei Province, Guangdong Province, Jiangxi Province andShanghai City, etc.
Chairmanof the Organizing Committee of the 2nd International AcademicConference on Energy and Environment
Chairmanof the 2012 International Conference Committee on Distributed EnergyControl and Intelligent Environmental Monitoring
Chairmanof the 2022 International Conference on Smart Energy
Scientificresearch projects in the past five years:
Development of energy conservation, noise reduction and dust removal technology in concrete preparation, Shanghai Zhaishi Building Materials Technology Co., Ltd, Period: 2021.10-2022.12, Project leader.
400KA Three field test technical service of electrolysis series, Press Metal Bintulu Sdn Bhd, Malaysia, Period:2021.5-2022.12,Project leader.
Research on energy saving and green standards in iron and steel industry—Limit and calculation method of energy consumption per unit product of lime（Plan No.2021-0035T-YB）, Institute of Information Standards for Metallurgical Industry, Period: 2020.7-2020.12, Project leader.
Formulation of local standard《Energy Consumption Quota and Calculation Method for Unit Lime Product》, Department of Industry and Information Technology, Hunan, Period:2020-2021, Project leader.
Four field test and analysis services for electrolytic cell, Guizhou Huaren New Materials Co., Ltd, Period:2020-2021,Project leader.
Detection and analysis of power consumption balance in electrolytic aluminum（Contract No.:ZYLYS3-951-2019）, Zunyi Aluminum Co., Ltd,Period:2019.9-2020.3, Project leader.
Research on the "Three Field" Test of 200KA Aluminum Electrolytic Cells, Guizhou Liupanshui Double Aluminum Co., Ltd, Period: 2019-2021,Project leader.
Guidance study on the formulation of the industry standard 《Quota and calculation method of energy consumption per unit product of lithium battery cathode materials》, Guangdong Bangpu Recycling Technology Co., Ltd, Period: 2020-2022, Project leader.
Energy quality/timing control and key equipment technology of calcination system（2018YFB0605902）,National key research and development plan sub project, Period:2018-2021, Project leader.
Formulation of Two standards including energy efficiency quota and energy conservation monitoring method for data center operation in Hunan Province, Period:2018-2019, Project leader.
Formulation of Quota and Calculation Method of Energy Consumption per Unit Product of Edible Vegetable Oil, Hunan Province, Period: 2017, Project leader
Formulation of Technical Requirements for Energy Efficiency Limits and Energy Conservation Monitoring of Industrial Boilers, Hunan Province, Period:2017, Project leader.
Research on the innovation mechanism of industrial energy conservation supervision during the period of the 13th Five Year Plan, China's industrial enterprise energy efficiency promotion project, Period: 2016-2017, Project leader.
Research and application of underwater high-performance repair materials and processes for Sanban Hydropower Plant, Period: 2017-2018, Project leader.
Researchpaper:
Yang,JB., Deng, SX*., Xu,H., Zhao, Y., Nie, CD., He YJ. Investigation and Practical Application of Silica Nanoparticles Composite Underwater Repairing Materials: Energies, 2021，04:14. (SCI,IF=3.004,Q3)
Nie, C., Deng, S*., &Liu, J., Numerical investigation on latent heat storage enhancement using a gradient-concentration nanoparticles phase change material: Applied Thermal Engineering, 2021, 197: 117360. (SCI,IF=5.295,Q2)
Chen B, Ye X, Shen J, Wang S, Deng SX*, Yang JB. Investigations on the energy efficiency limits for industrial boiler operation and technical requirements—taking China's Hunan province as an example: Energy, 2021, 220: 119672. (SCI,IF=7.147,Q3)
Nie, C., Liu, J., Deng, S*. Effect of geometry modification on the thermal response of composite metal foam/phase change material for thermal energy storage: International Journal of Heat and Mass Transfer, 2021, 165: 120652. (SCI,IF=5.584,Q1)
Cong Shi , Sha Wang*, Xiang Ge, Shengxiang Deng*, Bin Chen, Jun Shen. A review of different catalytic systems for dry reforming of methane: Conventional catalysis-alone and plasma-catalytic system: Journal of CO2 Utilization, 2021，46：101462. (SCI,IF=7.132,Q3)
Hang Zhang*， Bo Pang， Shimin Kang*， Jinxia Fu， Peifeng Tang， Jie Chang， Jietai Li， Zhilin Li, Shengxiang Deng*. The influence of feedstock stacking shape on the drying performance of conveyor belt dryer: Heat and Mass Transfer, 2022,58(1):157-170. (SCI,IF=2.464,Q3)
Hua Guo, Shengxiang Deng,* , Jinbiao Yang , Jiangwei Liu, Changda Nie. Analysis and prediction of industrial energy conservation in underdeveloped regions of China using a data pre-processing grey model. Energy Policy, 2020,139:111244. (SCI,IF=6.142,Q1)
Nie, C., Liu, J., Deng, S*. Effect of geometric parameter and nanoparticles on PCM melting in a vertical shell-tube system: Applied Thermal Engineering, 2020, 184: 116290. (SCI,IF=5.295,Q2)
Nie, C., Deng, S., Liu, J*. Effects of fins arrangement and parameters on the consecutive melting and solidification of PCM in a latent heat storage unit: Journal of Energy Storage, 2020, 29: 101319. (SCI,IF=3.762,Q2)
Nie, C., Deng, S., Guo, H., Liu, J*. Effects of partially thermally active walls on simultaneous charging and discharging of paraffin wax in a square cavity: Energy Conversion and Management, 2019, 202: 112201. (SCI,IF=11.35,Q1)
Deng Shengxiang*, Nie Changda, et al. Evaluation and optimization of thermal performance for a finned double tube latent heat thermal energy storage. International Journal of Heat and Mass Transfer, 2019.3 (SCI, IF=4.346, Q1)
Deng Shengxiang*, Nie Changda, et al. Improving the melting performance of a horizontal shell-tube latent-heat thermal energy storage unit using local enhanced finned tube. Energy & Buildings, ，2019.1. (SCI, IF=4.495, Q1)
Zhang Hang, Deng Shengxiang, Cao Xiaoling. Density functional theory investigation of gasification mechanism of a lignin dimer with β-5 linkage. Renewable Energy, 2018. (SCI, IF=4.357, Q1)
Zhang Hang, Deng Shengxiang. Numerical simulation of moisture-heat coupling in belt dryer and structure optimization. Applied Thermal Engineering, 2017, 127:292-301. (SCI, IF=3.634, Q1)
Zhang Hang, Deng Shengxiang. Evaluating heat flux profiles in aluminum reheating furnace with regenerative burner. Energies, 2017, 10(4):562-577. (SCI, IF=2.262, Q2)
Zhang Hang, Deng Shengxiang. Effect of material pile on the comprehensive performance of the belt dryer. International Journal of Agricultural and Biological Engineering, 2017, in review. (SCI, IF=0.835, Q3)
Zhang Hehui, Deng Shengxiang, Qu Yingjie. Numerical investigation of efficiency periodic fluctuation behavior of centrifugal pump at different working points [J]. Energies, 2017, 10(3): en10030342.(SCI, Q2)
Zhang Hehui, Deng Shengxiang, Qu Yingjie, Differential amplification method for flow structures analysis of centrifugal pump between design and off-design points [J]. Journal of Central South University, 2017, 24(6): 1443−1449.(SCI,Q3)
Zhang Hehui, Deng Shengxiang, Qu Yingjie. High working efficiency of rapid custom design [J]. World Pumps, 2016, 3: 34-36.(EI)
Zhang Hang, Deng Shengxiang. Calculation and validation of moisture uniformity in drying process based on Shannon-Wiener index [J]. Transactions of the Chinese Society of Agricultural Engineering, 2016, 32(20): 290-297.(EI)
Zhang Hang, Deng Shengxiang*,Tian Hong, Cao Xiaoling. Mechanism of Xylose Pyrolysis to Furfural Based on Density Function Theory[J]. Acta Petrolei Sinica , 2017, 33(2):356-363. (EI)
Zhang Hang, Deng Shengxiang*,Tian Hong, Cao Xiaoling. Density Functional Theory of Gasification Reaction of Lignan Model Compound With β-5 Linkage. Acta Petrolei Sinica., 2017, 33(5):975-984. (EI)
Deng Shengxiang*,Chen Gang,Chen Guibao,Comparison of calculation methods for wind shear exponent in complex terrain at altitude above 1000 meters, Transactions of the Chinese Society of Agricultural Engineering,2015,31(6): 218
222. (EI,CSCD)
Deng Shengxiang*，Zhou Jiemin.，An experimental study of the effect of water content on combustion of coal tar/water emulsion droplets，Energy，2011，36（10）：6130-6137. (SCI, Q1)
Deng Shengxiang*，Xie Qingsong，Zhou Jiemin，A lime shaft kiln diagnostic expert system based on holographic monitoring and real-time simulation，Expert Systems with Applications，2011，38（12）：15400-15408. (SCI, Q1)
Patentsand proprietary rights:
A repair method for detached cracks in deep water concrete face slab of reservoir. Patent code: ZL201811345881.5
An oil-water separation device based on density difference and its method.Patent code: ZL201811505305.2
A combustion heat recovery device for combustible waste gas of carbonization furnace. Patent code: CN201710483716.5
A method and device for heat recovery of cooling water in melting and casting plant. Patent code: CN201710333411.6
A food drying device. Patent code: CN201610823272.0
A waste heat recovery system for horizontal carbon tube furnace and its application method. Patent code: ZL201610545948.4
A top heat preservation device suitable for anode baking furnace. Patent code:CN201610250560.1
An external heat preservation device suitable for high temperature zone of rotary kiln. Patent code: CN201410244525.X
A self-cooling and high temperature resistant valve. Patent code: CN201310726044.8
A kind of coke oven waste gas flame furnace system.Patent code: CN201510577470.9
A method and device for recovering waste heat of shaft furnace pellet clinker. Patent code: CN201510260232.5
A method of using coal tar as fuel for starting ignition of pulverized coal boiler. Patent code: CN200910172416.0
A kind of hot water manufacturing method of Complementing air heat source and waste heat of Lack of steam. Patent code: CN200810031352.8
A zero-stirring mixing device suitable for non-phase solution. Patent code: CN200810031079.9
A gasification method and device for treating low calorific value fuel. Patent code: CN02150100.9
A compound coal binder for lime shaft kiln. Patent code: CN200710034875.3
Academicawards in recent 5 years:
Energy efficient Utilization and carbon reduction equipment and technology development and industrialization application, China Association for the Promotion of Science and Technology Industrialization,Ministry of Science and Technology, the Second Prize of Industrialization of Scientific and Technological Achievements, Rank first, 2022
Development and application of energy-saving technology in non-ferrous metallurgy industry, China Non-ferrous Metal Industry Science and Technology Award, the First Prize of Scientific and Technological Progress, Rank first, 2021.
Easy to install vertical axis wind power generation device, the second prize of the first National Renewable Energy Science and Technology Competition for College Students, Advisor, 2018.
Quick installation of wind power generation device suitable for single solar street lamp, Third prize of National College Students Energy Conservation and Emission Reduction Competition, Advisor, 2018.
Excellent Class Tutor Award, 2017.
Efficient oil-water separation device, the third prize of Social Practice and Science and Technology Competition of Energy Conservation and Emission Reduction of Central South University, 2017.
